In 2012 Marine Sanitation PTY LTD designed and began producing their very own Odour Filter, compatible with all waste tanks and 100% Australian made. The Marsan Odour Filter is designed to eliminates any bad odours from both black and grey water waste tanks.
Key Benefits
100% Compatible with all waste tanks
Used for Marine, RV/ Caravans
4 sizes to suit hose sizes 5/8″(16mm), 3/4″(19mm), 1″(25mm) and 1-1/2″(38mm)
Comes with quick release brackets for easy replacement
Granulated charcoal filter which keeps the air smelling fresh
Made in Australia
Marsan can be purchased from most RV shops and boat chandleries. Or you can buy direct from our online store.
Installation
The Marsan Odour Filter is easy to install to all holding tank applications for marine and RV’s.
There are two different installation ways that odour filter may be fitted to a holding tank.
Option 1 – Odour filter inline with breather hose
1. Select location to install filter ABOVE WASTE TANK.
(Filter must be higher than the top of tank)
2. Remove caps from both ends of the filter.
3. Install mounting brackets using the screws supplied
and clip filter into position.
4. Install hose from vent and through hull vent fitting.
5. Fill in replacement date on filter.(12 months from installation)
Option 2 – Odour filter fitted directly to the waste tank (Not Recommended)
Insert 5/8 (16mm) hose tail into rubber seal in top of tank.
Place breather hose onto hose tail at the other end of the filter.
Caution: Make sure not to over fill the waste tank, as this will water log the filter and the filter will no longer work. Replace the odour filter if it gets wet.